
16
Note: In the following circumstances, the pairing information will be deleted. Please pair
again.
- One or both of the devices are reset to factory settings.
- The pairing information is deleted from the device(eg. when servicing the device).
- If the paired devices are more than 10, AGPTEK-C10 will delete the earliest
connected device.
- If the pairing time is over before it is done, please try again.
- There are some restrictions on outputting sound through Bluetooth connection.
- Even if you connect a headphone to the headphone jack, no sound is output from
the headphone. The sound will be output from the Bluetooth device.
Bluetooth connection will be automatically disconnected in the following situations:
The battery of the AGPTEK-C10 or Bluetooth device is exhausted.
The AGPTEK-C10 or Bluetooth device is turned off.
The AGPTEK-C10 or Bluetooth device is too far away or blocked.
When the Bluetooth connection is enabled, the sound settings(Equalizer & Variable
speed playback) will not work.
If the sound is interrupted or skipped during the Bluetooth connection, try the following
methods. Place AGPTEK-C10 close to the Bluetooth device.
When using the Bluetooth function, do not block the lower area on both sides(as shown
below) as it will affect the Bluetooth signal.
Note: Some brands of Bluetooth devices may not be compatible with AGPTEK-C10.