6
If there is damage on protective gear, replace it completely. Generally,
a chain should be fitted on protective device not only under working
condition.
3. When an implement is fitted on tractor, always use pins to lock the
crankshaft. If pins go wrong, replace them.
4. When implements are locked on tractor, cardan shaft should be fixed and
lock on both ends through pins. The protective device of cardan should
be in good condition and kept still during machine running. When safety
device is damaged. For safety, use a small chain that is ready to replace
it.
5. When machine stops work, let tractor come away from hook. To avoid
stopping on the ground, an extra chain of cardan shaft can be used. When
fix cardan shaft, make sure it is locked up.
Ⅶ
CUTTING TOOL REPLACIN
G
1. Before changing operation of the implement, stop engine of tractor, and
after all moving parts and components stops, disconnect cardan shaft with
force.
2. Stop the implement on a plain ground and do as the following: screw down
all the bolts(1), replace used or damaged cutting tools, install left
and right(4) carefully, tighten bolts(1) with shim(2) and nut (3), and
tighten bolt(1).
3. For good performance of implement, use original cutting tools only.
Summary of Contents for AGTL105
Page 8: ...8 ...
