AGP 1100W Electric Beveler model B16, Instruction Manual

Page: 4 / 24

GENERAL SAFETY RULES
WARNING! Read and understand all
instructions. Failure to follow all instructions
listed below, may result in electric shock,
fire and / or serious personal injury. The term
"power tool" in all of the warnings listed
below refers to your mains-operated
(corded) power tool.
SAVE THESE INSTRUCTIONS.
Working area safety
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquid, gases, or dust.
Power
tools create sparks which may ignite the
dust or fumes.
Keep bystanders, children, and visitors
away while operating a power tool .
Distractions can cause you to lose control.
Electrical Safety
Grounded tools must be plugged into an
outlet properly installed and grounded in
accordance with all codes and ordinances.
Never remove the grounding prong or
modify the plug in any way. Do not use any
adaptor plugs. Check with a qualified
electrician if you are in doubt as to whether
the outlet is properly grounded.
If the tools
should electrically malfunction or break
down, grounding provides a low resistance
path to carry electricity away from the user.
Double insulated tools are equipped with a
polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a
polarized outlet. Do not change the plug in
any way.
Double insulation (1100W Electric
Beveler Mode & 1800W Electric Beveler
Mode only ) eliminates the need for a three
wire grounded power supply system.
Avoid body contact with grounded
surfaces such as pipes, radiators, ranges
and refrigerators.
There is an increased risk
of electric shock if your body is grounded.
Don’t expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
Don’t abuse the cord. Never use the cord to
carry the tools or pull the plug from an
outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged
cords immediately .
Damaged cords
increase the risk of electric shock.
When operating a power tool outside, use
an outdoor extension cord marked
" W-A " or
" W. " These cords are rated for outdoor use
and reduce the risk of electric shock.
Personal Safety
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or
medication.
A moment of inattention while
operating power tools may result in serious
personal injury.
5