Agora Outdoor Living PC-15000, Assembly Instructions And Owner'S Manual

Page: 2 / 23

2 2012 PC-15000
First, compare the parts in the box with the parts list on the following pages and
make sure that none are missing. If you discover any missing parts, please visit
www.paci fi ccurrentsinc.com or call (877) 276-1486 .
Save your sales receipt
as you
will need this to obtain service.
Choose and measure the fi nal loca Ɵ on where you would like to place the prod-
uct and ensure that it will fi t a 10’ x 13’ rectangle with 10’ height clearance. Then,
choose an assembly area as close as possible to this fi nal loca on and large enough
to layout and pre-assemble all the parts for this Gazebo.
It is highly recommended that you cover the work surface with a tarp or other fabric
to prevent scratches to the
fi nish or other damage during assembly.
You will need these addi onal tools: a ladder and an adjustable wrench.
You may also need these addi ontal tools (op onal): work gloves, waterproo fi ng
spray.
Prepare the work area:
General Notes:
Pre-Assembly Steps
Thank you for choosing a Pacifi c Currents Product.
Please make sure you have carefully read and understood
these assembly instructions before you begin.
1. You will need the help of another person to assemble this product. Please ask a
friend or neighbor for assistance!
2. Once a unit has been pre-assembled in each step, please set it aside un l further
instruc ons.
3. For all customers, we highly recommend that you remove your canopy top in
cases of severe inclement weather such as thunderstorms. Damage due to acts of
nature are not covered in the warranty.
4. You do not need to disassemble the gazebo during winter months. However, to
prevent damage to the frame and canvas top due heavy snow loads, remove the
canvas top and store it in a dry loca on un l spring.