42
ADJUSTING THE LED-BACKLIT DISPLAY
Item
Function
Operation
Range
Control Panel
Remote Control
AUTO ADJUST
Press to perform auto
adjustment. This function
automatically tunes the LED-
backlit display to its optimal
setting, including horizontal
position, vertical position, clock,
and phase.
When auto adjustment is
initiated, the below message is
displayed on the screen.
INFORMATION
AUTO ADJUST
When the message disappears,
this indicates the auto
adjustment is completed.
Note:
• During auto adjustment, the
screen will slightly shake for a
few seconds.
• It is recommended to use
the auto adjustment function
when using the LED-backlit
display for the first time
or after a resolution or
frequency change.
Press the button
to execute the
function.
Press the
Menu
button/
OK
button to
execute the function.
H. POSITION
(Horizontal
Position)
Moves the screen image to the
left or right.
Note:
The default value is
53.
Press the or
button [for SC-17AH/
SC-19AH/SC-32AH
model] or the or
button [for SC-22AH/
SC-24AH/SC-42AH
model] to set the
value.
Press the or
button [for SC-32AH
model] or the or
button [for SC-42AH
model] to set the
value.
0 to 100
V. POSITION
(Vertical Position)
Moves the screen image up or
down.
Note:
The default value is
31.
Press the or
button [for SC-17AH/
SC-19AH/SC-32AH
model] or the or
button [for SC-22AH/
SC-24AH/SC-42AH
model] to set the
value.
Press the or
button [for SC-32AH
model] or the or
button [for SC-42AH
model] to set the
value.
0 to 100
