background image

AGM Global Vision

22

solely to the Customer. AGM Global Vision’s liability hereunder for damages, 

regardless of the form or action, shall not exceed the fees or other charges paid 

to AGM Global Vision by the customer or customer’s dealer. AGM Global Vision 

shall not, in any event, be liable for special, indirect, incidental, or consequential 

damages, including, but not limited to, lost income, lost revenue, or lost profit, 

whether such damages were foreseeable or not at the time of purchase, and 

whether or not such damages arise out of a breach of warranty, a breach of 

agreement, negligence, strict liability, or any other theory of liability.

4.1.3  PRODUCT REGISTRATION

In order to validate the warranty on your product, the customer must complete 

and submit AGM Global Vision PRODUCT REGISTRATION FORM on our website 

(www.agmglobalvision.com/customer-support).

4.1.4  OBTAINING WARRANTY SERVICE

To obtain warranty service on your unit, the End-user (Customer) must notify 

the AGM Global Vision service department via e-mail. Send any requests to 

[email protected]

 to receive a Return Merchandise Authorization 

number (RMA). When returning any device, please take the product to your 

retailer, or send the product, postage paid and with a copy of your sales 

receipt, to AGM Global Vision’s service center at the address listed above. All 

merchandise must be fully insured with the correct postage; AGM Global Vision 

will not be responsible for improper postage or merchandise that becomes 

lost or damaged during shipment. When sending product back, please clearly 

write the RMA# on the outside of the shipping box. Please include a letter 

that indicates your RMA#, the Customer’s Name, a Return Address, reason 

for the return, contact information (valid telephone numbers and/or an e-mail 

address), and proof of purchase that will help us to establish the valid start date 

of the warranty. Product merchandise returns that do not have an RMA# listed 

may be refused, or a significant delay in processing may occur. Estimated 

Warranty service time is 10-20 business days. The End-user/Customer is 

responsible for postage to AGM Global Vision for warranty service. AGM Global 

Vision will cover return postage/shipping after warranty repair to the End-user/

Customer only if the product is covered by the aforementioned warranty. AGM 

Global Vision will return the product after warranty service by domestic UPS 

Ground service and/or domestic mail. Should any other requested, required, or 

international shipping methods be necessary, the postage/shipping fee will be 

the responsibility of the End-user/Customer.
For service, repair or replacement, please contact:

AGM Global Vision, LLC

173 West Main Street
PO Box 962
Springerville, AZ 85938
Tel. 928.333.4300
[email protected]
www.agmglobalvision.com

Summary of Contents for TAIPAN TM10-256

























Reviews: