Operation
4-3
Left Hand Control Panel
The left hand control panel looks like the figure below.
Upper Rear Station:
The 3 position switch changes the station between a windup and
unwind The regulator adjusts the air pressure to the brake -
clutch changing the web tension. The gauge indicates air
pressure which allows for repeatable results.
Upper Front Station:
The 3 position switch changes the station between a windup and
unwind. The regulator adjusts the air pressure to the
brake/clutch changing the web tension. The gauge indicates air
pressure which allows for repeatable results.
Center Front Station:
The 2 position switch changes the station between off and on.
This station is unwind only. The regulator adjusts the air
pressure to the brake changing the web tension. The gauge
indicates air pressure which allows for repeatable results.
Nip Roller Control:
The open/close switch is found on the RH panel, but the
regulator adjusts the air pressure to the cylinders and the gauge
indicates air pressure. An E-stop switch is located here for easy
access to the operator.
Lower Rear Station:
The 3 position switch changes the station between a windup and
unwind. The regulator adjusts the air pressure to the
brake/clutch changing the web tension. The gauge indicates air
pressure which allows for repeatable results.
Lower Front Station:
The 3 position switch changes the station between a windup and
unwind. The regulator adjusts the air pressure to the
brake/clutch changing the web tension. The gauge indicates air
pressure which allows for repeatable results.
Figure 2. Left Hand Control Panel