Scope Features and Functions
2
U2701A/U2702A USB Modular Oscilloscopes User’s Guide
33
Probe Attenuation Control
The probe attenuation control changes the attenuation factor
for the probe. The attenuation factor changes the vertical
scaling of the oscilloscope so that the measurement results will
reflect the actual voltage levels at the probe tip.
To change the probe attenuation factor for channel 1, click on
the
button on the soft front panel. Click on the
channel options button and select
Attenuation
from the options
list. An option list containing the attenuation factors in 1X, 10X,
100X will appear, select the desired factor.
Table 2-1
Probe attenuation factors and its corresponding
settings.
Volt/Div Control
The Volt/Div control sets the sensitivity of the channel. You can
select the channel sensitivity from the drop- down list.
Probe attenuation factors and corresponding settings
1:1
1X
10:1
10X
100:1
100X
Drop- down list
U2700A_Modular_Scope.book Page 33 Tuesday, May 6, 2008 9:32 AM
