Agilent Technologies TS-5410, Site Preparation And Installation Manual

Page: 17 / 30

Site Preparation 17 Chapter 1
The Site Plan Drawing
A system plan drawing should be used for all aspects of the site preparation.
A complete drawing should detail power availability, LAN availability and
system placement with respect to other equipment. It can also serve to verify
physical access for operators and maintenance personnel.
Figure 1-2 shows a typical layout for a typical Agilent E22xxA Automotive
Functional Test System. If the operator will be positioned in front of the
system, allow 1 meter (3.3 feet) of space in front of the system. You should
allow 1 meter (3.3 feet) of space behind the system for service. The 0.75
meter rack is designed to fit under many production lines.
Figure 1-2. Typical test system layout (overhead view)
1000 mm
(39.4 in.)
1000 mm
(39.4 in.)
600
.0mm
(23.6 i
n
.)
Agilent Technologies
Automotive Functional
Test System
(Top View)
Instrument and Service
Access Area
Operator Area*
850 mm
(includes Express
Connect)
(33.46 in.)
*For example purposes only. The operator does not have to be positioned in front of the system.
Rack height is 740 mm (29.1 in.)