Agilent Technologies TPS-compact, User Manual

Page: 223 / 240

Technical Information
Agilent TPS-compact User Manual 223
Window Meanings
N. Read/
Write Data
Type Description Admitted Values
000 R/W L Start/Stop (in remote/ mode the window is a read
only) Start = 1
Stop = 0
001 R/W L Low Speed Activation (in remote/ mode the window is
a read only) No = 0
Yes = 1
(default = 0)
008 R/W L Remote or Serial configuration Remote = 1
Serial = 0
(default = 1)
100 R/W L Soft Start (write only in Stop condition) YES = 1
NO = 0
101 R/W N R1 Set Point type 0 = Frequency
1 = Power
2 = Time
3 = Normal
4 =Pressure
(default = 0)
102 R/W N R1 Set Point valve (expressed in Hz, W or s) (default = 867)
103 R/W N Set Point delay: time between the pump start and the
set point check (seconds) 0 to 999999
(default = 0)
104 R/W L Set Point signal activation type: the signal can be "high
level active" or "low level active" 0 = high level active
1 = low level active
(default = 0)
105 R/W N Set point hysteresis (in % of value) 0 to 100
(default = 2)
107 R/W L Active Stop (write only in stop) 0 = NO
1 = YES
(default = 0)
108 R/W N Baud rate 600 = 0
1200 = 1
2400 = 2
4800 = 3
9600 = 4
(default = 4)
111 R/W L Analog output type: output voltage signal proportional
to frequency or power 0 = frequency
1 = power
(default = 1)
2 = Pump temperature
3 = Pressure
117 R/W N Low Speed frequency (Hz) 1100 to “Maximum
rotational frequency”
(win 120)
(default = 1100)