Running Samples
74
NovoCyte Quanteon Flow Cytometer Operator's Guide
Figure 41.
Experiment Manager
NOTE
The red arrow on the left of a sample in the
Experiment Manager
indicates this
sample is the
Active Sample
. A sample can be designated as the
Active Sample
by
double-clicking the sample in the
Experiment Manager
.
NOTE
Please refer to the
NovoExpress Software Guide
for details about creating Group,
Specimen, and Sample.
Define Sample Acquisition Parameters
1
Double-click the
T-Lym
sample to make it the
Active Sample
.
2
Set the test parameters in the
Cytometer Setting > Parameters
panel (see
Figure 42). By default, the
Height
parameters of FSC and SSC signals are
always selected. Either
Area
or
Height
or both can be selected for fluorescent
channels to be used in the experiment. In this example, select
FSC, SSC, B525,
Y586, B667, R667
Height
and
Area
as detection parameters.
3
Click the
Alias
area in the corresponding fluorescent channels to name the
detection channel with the name of the fluorophores. In this example, rename
Summary of Contents for NovoCyte Quanteon
Page 147: ......