Running Samples
NovoCyte Quanteon Flow Cytometer Operator's Guide
75
B525, Y586, B667,
and
R667
to be
CD3 FITC, CD8 PE, CD45 PerCP
, and
CD4
APC
, respectively.
Figure 42.
Define Sample Acquisition Parameters
NOTE
Parameters that are not selected in the
Parameters
setting panel will not be
collected in the data, and therefore will not be available for data analysis. However,
selecting too many parameters other than those really needed in the experiment
will unnecessarily increase the size of the experiment file, causing decreased data
processing speed. Before doing an experiment, the parameters should be set
appropriately, in order to avoid incomplete data collection or slow software data
processing speed.
NOTE
After the system has started collecting samples, only the
Alias
of the parameters
can be edited. Selection or de-selection of parameters is not allowed.
Summary of Contents for NovoCyte Quanteon
Page 147: ......