Agilent Technologies Nano Indenter G200, User Manual, Page: 53 / 478

Quick Start Guide 2
Agilent Nano Indenter G200 User’s Guide 2-34
18
Click on the center circle in the schematic map, circled in red in
Figure 2-42 , which corresponds to the center (reference) sample in
the sample tray.
Figure 2-42 Nano Handset schematic map with center sample circled in
red
19
Right-click anywhere on the schematic map and select Move to
Target from the resulting pop-up menu, as shown in Figure 2-43 .
Figure 2-43 Select Move to Target from right-click menu
The X/Y positioning table should then move to the proper location
under the microscope and the red cone on the schematic map should
move toward the target. Once the cone reaches the target, it turns green.