3
_____________________________________________________________________________
Change 1
Change 1, on Page 147, in the specifications table for optical to electrical measurements at 850 nm (OE
mode) shows an instance of “typ” that must be removed.
Instructions
In the “Minimum measurable frequency Response (noise floor)
b c
” row of the specification table, remove
“typ.” after “
−
58 dB (A/W)” as shown below.
_____________________________________________________________________________
Change 2
Change 2, on Page 148, in the specifications table for optical to optical measurements at 850 nm (OO mode)
shows two instances of “typ” that must be removed.
Instructions
In the “Relative frequency response uncertainty
a
” row of the specification table, remove “typ.” after “±0.4
dBe” and “±0.5 dBe” as shown below.
