Agilent Technologies Medalist x6000, Operator Instructions Manual

Page: 31 / 42

N7280 N7280 N7280 N7280----90011 90011 90011 90011 – – – – Rev A Rev A Rev A Rev A Operator Instructions Operator Instructions Operator Instructions Operator Instructions
5
3 3 3 3 Operator Instructions Operator Instructions Operator Instructions Operator Instructions
Startup the Startup the Startup the Startup the System System System System
The Medalist x6000 is operated through the use of a user
interface running on the system controller. Before starting
the system software, verify that the X-ray has been enabled.
Verify the Safety Interlocks are Closed Verify the Safety Interlocks are Closed Verify the Safety Interlocks are Closed Verify the Safety Interlocks are Closed
On the operator control panel (see Figure 3) verify that the
Safety Interlocks green LED is lit. If it is not, call a service
technician to resolve the problem.
Verify the Verify the Verify the Verify the XXXX----Ray Ray Ray Ray Has Been Enabled Has Been Enabled Has Been Enabled Has Been Enabled
On the operator control panel (see Figure 3) verify that the
X-ray Control key is in the enabled position (1) and press
the X-ray Control enable button (1). Verify that the X-rays
red LED is lit.
Log o
Log o Log o
Log on to Microsoft Windows XP
n to Microsoft Windows XP n to Microsoft Windows XP
n to Microsoft Windows XP
Log on to Microsoft Windows using the Windows user name
and password provided by your administrator. When you
log on, the Medalist x6000 software starts automatically.
Log on to the Medalist x6000 User Interface Log on to the Medalist x6000 User Interface Log on to the Medalist x6000 User Interface Log on to the Medalist x6000 User Interface
Log on to the Medalist x6000 user interface using the user
name and password provided by your administrator. Press
Login .
Figure 4: Application login pop-up
The system will perform a system startup. This may
take a few minutes. A progress indicator will be
displayed (see Figure 5).