Magnis and Magnis Dx NGS Prep System User Guide
30
Figure 14
Connection Settings screen
4
Select between obtaining an IP address automatically and assigning an IP address manually.
•
When you select
Obtain an IP Address Automatically
, an IP address is automatically
assigned and the fields for network information are unavailable.
•
When you select
Use Manual Configuration
, the fields for network information are editable.
Enter the appropriate information into the fields. If needed, ask your network administrator
to provide the information.
5
Press
OK
to save your changes.
Set the instrument health check settings
Based on this setting, the system can include or exclude verification of the teach points as part of
the first instrument health check (IHC) that is performed each time the instrument is powered on.
1
From the Home screen, press
Settings
.
The
2
Press
System Settings
.
The
3
Press
Other Settings
.
The
opens.
NOTE
If the system loses its network connection, or the IP address automatically
assigned to the system is an internal IP address, press
Renew
. Either the
previous IP address will be re-assigned to the system (if it is available) or a new
IP address will be assigned.
