Agilent Technologies Infinium DCA 86100A, Service Manual

Page: 24 / 268

1-18
General Information
Software License Maintenance, 86100C
b Enter the Current Host Name/ID and click on Search.
c Verify the correct licenses are found by reviewing the license contents.
N O T E For multiple licenses on the same Host ID number, skip Step d and click Add All in Step e .
d Pull down the “Select License Item” menu and select the license line(s) from the license list.
e To add the License Line to the Work List, click on Add, or use Add All to enter all license lines.
N O T E The work list item should now list the old Host Name ID, Order Number, Product, Qty, Expiry
Date, and E-mail.
f Click on the item in the work list.
N O T E After clicking on the item, the old Host Name ID should show on the left side of the screen under
“Enter Host Name/ID”.
g Enter the new Host Name/ID in place of the old one.
h Enter your E-mail address (this is the address where the new license file will be sent).
N O T E Although listed as optional, you must enter your E-mail address so that you can receive the newly
generated license file.
i Click the Update button or Update All for all lines.
j Enter your update notes briefly explaining the rehosting reason.
For example:(your name) replaced 86100C A4 motherboard; previous host ID number:
003064023C0A, new host ID number: 074091092F0B
k Review the information on the screen and click on Save.
5 Within a few minutes you should receive an E-mail with the license file for the new Host ID
Number.
6 Once you have obtained the new license key or keys, install it in the DCA. Refer to “Install a
License File” on page 1-18 .
Install a License File After you receive the new license file, copy it to a location that is available to the 86100C. This
could be the 86100C hard drive, USB CD drive, network drive, or a USB memory stick (recom-
mended).
1 On the 86100C DCA, click Licenses on the Utilities menu to view the Licenses dialog box.
2 Highlight the feature that you want to activate under Features.
3 Click Install New License.
4 Click Browse for License File and locate your license file.
5 Click Install This License File.
6 Repeat the above steps for all licenses.
7 To confirm that the license is installed verify that the Status is “License installed”.
8 Close the window.