Agilent Technologies InfiniiVision 7000A Series, Programmer'S Manual

Page: 548 / 922

548 Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
5
Commands by Subsystem
:TRIGger:IIC[:SOURce]:CLOCk
(see page 786 )
Command Syntax
:TRIGger:IIC:[SOURce:]CLOCk <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:IIC:[SOURce:]CLOCk command sets the source for the IIC
serial clock (SCL).
Query Syntax
:TRIGger:IIC:[SOURce:]CLOCk?
The :TRIGger:IIC:[SOURce:]CLOCk? query returns the current source for
the IIC serial clock.
Return Format
<source><NL>
See Also
• "Introduction to :TRIGger Commands" on page 467
• ":TRIGger:IIC[:SOURce]:DATA" on page 549