Agilent Technologies InfiniiVision 7000A Series, Programmer'S Manual

Page: 528 / 922

528 Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide
5
Commands by Subsystem
:TRIGger:I2S:ALIGnment
(see page 786 )
Command Syntax
:TRIGger:I2S:ALIGnment <setting>
<setting> ::= {I2S | LJ | RJ}
The :TRIGger:I2S:ALIGnment command selects the data alignment of the
I2S bus for the serial decoder and/or trigger when in I2S mode:
• I2S — standard.
• LJ — left justified.
• RJ — right justified.
Note that the word select (WS) polarity is specified separately with the
:TRIGger:I2S:WSHigh command.
Query Syntax
:TRIGger:I2S:ALIGnment?
The :TRIGger:I2S:ALIGnment? query returns the currently selected I2S data
alignment.
Return Format
<setting><NL>
<setting> ::= {I2S | LJ | RJ}
See Also
• "Introduction to :TRIGger Commands" on page 467
• ":TRIGger:I2S:CLOCk:SLOPe" on page 530
• ":TRIGger:I2S:RWIDth" on page 536
• ":TRIGger:I2S:TWIDth" on page 542
• ":TRIGger:I2S:WSLow" on page 543