Agilent Technologies InfiniiVision 7000A Series, Programmer'S Manual

Page: 273 / 922

Commands by Subsystem
5
Agilent InfiniiVision 7000A Series Oscilloscopes Programmer's Guide 273
:FUNCtion:OPERation
(see page 786 )
Command Syntax
:FUNCtion:OPERation <operation>
<operation> ::= {ADD | SUBTract | MULTiply | INTegrate | DIFFerentiate
| FFT | SQRT}
The :FUNCtion:OPERation command sets the desired waveform math
operation:
• ADD — S source2.
• SUBTract — Source1 - source2.
• MULTiply — Source1 * source2.
• INTegrate — Integrate the selected waveform source.
• DIFFerentiate — Differentiate the selected waveform source.
• FFT — Fast Fourier Transform on the selected waveform source.
• SQRT — Square root on the selected waveform source.
When the operation is ADD, SUBTract, or MULTiply, the
:FUNCtion:SOURce1 and :FUNCtion:SOURce2 commands are used to select
source1 and source2. For all other operations, the :FUNCtion:SOURce1
command selects the waveform source.
Query Syntax
:FUNCtion:OPERation?
The :FUNCtion:OPERation? query returns the current operation for the
selected function.
Return Format
<operation><NL>
<operation> ::= {ADD | SUBT | MULT | INT | DIFF | FFT | SQRT}
See Also • "Introduction to :FUNCtion Commands" on page 266
• ":FUNCtion:SOURce1" on page 277
• ":FUNCtion:SOURce2" on page 278