Agilent Technologies InfiniiVision 3000 X-Series, Programmer'S Manual

Page: 1023 / 1232

Obsolete and Discontinued Commands
34
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 1023
:MEASure:TSTArt
(see page 1088 )
Command Syntax
:MEASure:TSTArt <value> [suffix]
<value> ::= time at the start marker in seconds
[suffix] ::= {s | ms | us | ns | ps}
The :MEASure:TSTArt command moves the start marker (X1 cursor) to the
specified time with respect to the trigger time.
Query Syntax
:MEASure:TSTArt?
The :MEASure:TSTArt? query returns the time at the start marker (X1
cursor).
Return Format
<value><NL>
<value> ::= time at the start marker in NR3 format
See Also
• "Introduction to :MARKer Commands" on page 364
• "Introduction to :MEASure Commands" on page 388
• ":MARKer:X1Position" on page 366
• ":MARKer:X2Position" on page 368
• ":MARKer:XDELta" on page 370
• ":MEASure:TDELta" on page 1019
• ":MEASure:TSTOp" on page 1024
N O T E
The short form of this command, TSTA, does not follow the defined Long Form to Short
Form Truncation Rules (see
page 1090 ). The normal short form "TST" would be the same for
both TSTArt and TSTOp, so sending TST for the TSTArt command produces an error.
N O T E
The :MEASure:TSTArt command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :MARKer:X1Position command (see
page 366 ) instead.