Introduction
1
Quiet Cover MS Service Manual
11
Electromagnetic compatibility
This device complies with the requirements of CISPR 11.
Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received,
including interference that may cause undesired
operation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try one
or more of the following measures:
•
Relocate the radio or antenna.
•
Move the device away from the radio or television.
•
Plug the device into a different electrical outlet, so that
the device and the radio or television are on separate
electrical circuits.
•
Make sure that all peripheral devices are also certified.
•
Make sure that appropriate cables are used to connect the
device to peripheral equipment.
•
Consult your equipment dealer, Agilent Technologies, or
an experienced technician for assistance.
•
Changes or modifications not expressly approved by
Agilent Technologies could void the user’s authority to
operate the equipment.
C A U T I O N
Be sure to position the Quiet Cover MS so that there is plenty of
room to allow access to panels and controls.
WA R N I N G
In the event of a temperature alarm malfunction or if the alarm has
been on for an extended period of time, the Quiet Cover MS and
the pump may be dangerously hot. Check that the Quiet Cover MS
and pump are cool before you touch them.
