Agilent Technologies G1157A, User Manual

Page: 22 / 78

22 Agilent 1200 Series Valves
2 Operation
Handheld Controller functions
Handheld Controller functions
With firmware revision B.03.11 or higher the following valve functions with
the Agilent 1200 Series control module G1323B are available. Complete
control of an Agilent 1200 Series valve during an LC analysis requires
ChemStation Revision A.09.03 or higher.
Switching the Valve
1 From the startup screen of the Agilent 1200 Series control module select
System (F5)
2 Select Control (F5) and then Valve to open the screen that is displayed in
Figure 6 . Use the arrow keys (up and down) to switch the valve to the next
position.
Valve Synchronization
1
From the startup screen of the Agilent 1200 Series control module select
System (F5)
2
Select
Tests (F3)
and
Valve
to open the Synchronization screen as displayed
in Figure 7 .
3
Press
Synchronize (F7)
and select the position for the valve synchronization.
Please also read the section “Valve Synchronization" on page 37.
Figure 6 Switching the Agilent 1200 Series valve