Agilent Technologies FieldFox MW N9913A, Service Manual

Page: 93 / 156

N9927-90003 6-13
FieldFox Analyzer Replaceable Parts
Replaceable Parts Listings
Miscellaneous Parts
Table 6-1 Part Numbers for Miscellaneous Parts and Accessories
Description
Model or Part
Number
Repair and Re-assembly Kit
IMPORTANT
This kit is required each time the FieldFox case is opened for any reason.
The kit includes the following items, some or all of which are necessary to re-assemble the internal assemblies
and the case, depending upon the depth of the repair.
Repair and Re-assembly Kit (Includes the following items.)
Screw, machine, 90-deg flat head, Torx T10, M3 x 0.5, 8mm; qty 4
Screw, machine, 90-deg flat head, Torx T10, M3 x 0.5, 6 mm; qty 17
Screw, machine w/patch lock, pan head, Torx T8, M2.5 x 0.45, 6 mm; qty 4
Screw, machine w/crest cup washer, pan head, Torx T10, M3.0 x 0.5, 8 mm; qty 4
Screw, machine, 90-deg flat head, Torx T10, M3 x 0.5, 14 mm; qty 6
Screw, machine, button head, Torx T8, M3 x 0.5, 8 mm; qty 4
Screw, machine w/flat washer, pan head, Torx T10, M3 x 0.5, 35 mm; qty 6
Rectangular Laser Address Label
O-STRIP RFI Hollow 0.060 in OD, 0.020 in ID; qty 1
Tape, 1/4-inch x 1-inch, for LCD ribbon cable; qty 4
Gasket, Blank Panel, qty 1
Gasket, I/O Panel, qty 1
Cover, hinge
N9927-60130
0515-1035
0515-1946
0515-1940
0515-0372
0515-2349
0515-2217
0515-5153
7121-8321
8160-1725
N9912-20043
N9912-40002
N9912-40003
W1312-40068
Ferrite Cores
Kit containing ferrite cores for use on external LAN cable and headphones cable. N9927-60028
Service Tools
T-8 TORX driver; set to 6 in-lb N/A
T-10 TORX driver; set to 9 in-lb N/A
5/16 inch, open-end torque wrench; set to 10 in-lb
N/A
7/16 inch, hex nut wrench or “nut driver”; set to 9 in-lb
N/A
9/16 inch, open-end torque wrench; set to 21 in-lb
N/A
Documentation
Users’ Guide. Can also be printed from the Agilent Web site. Refer to “Printing Copies of
Documentation from the Web” on page 4 .)
N9927-90001
Quick Reference Guide N9927-90002
Service Guide. (Not available in printed form. Part number is for reference only. Must be
printed from the Agilent Web site. Refer to
“Printing Copies of Documentation from the
Web” on page 4 .)
N9927-90003