Agilent Technologies E5505A, Installation Manual

Page: 15 / 96

General Information
1
E5505A Installation Guide 15
Table 6 Amplitude ranges
Power requirements
The flexibility of the E5505A system configuration results in a significant
range of power requirements, depending on the type and number of
instruments in a system.
Table 7 provides the maximum requirements for
individual instruments so that you can determine the requirements of your
specific system. It also provides the maximum current drawn by an
E5505A system that contains one of each type of instrument listed in the
table.
External noise input port 0.01 Hz to 100 MHz
Measurement accuracy ±2 dB (<1.0 MHz offsets)
±4 dB (<100 MHz offsets)
Low Frequency Inputs Options 001 & 201
High Frequency Inputs Options 001
AM Noise
Carrier Frequency
Range 50 kHz to 1.6 GHz 1.2 GHz to 26 GHz 50 kHz to 26.5 GHz
RF Input (R port) 0 dBm to +23 dBm 0 dBm to +5 dBm N/A
RF Input with Option 001 0 dBm to +30 dBm 0 dBm to +30 dBm 0 dBm to +30 dBm
Signal Input (L port) +15 dBm to +23 dBm +7 dBm to +10 dBm
Table 5 Operating characteristics (continued)
N O T E
Samples of this product have been type tested in accordance with the Agilent
Environmental Test Manual and verified to be robust against the environmental stresses of
Storage, Transportation and End-use; those stresses include but are not limited to
temperature, humidity, shock, vibration, altitude and power line conditions. Test Methods
are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3.
Table 7 E5505A maximum AC power requirements
Component 115 VAC 230 VAC
System maximum
(one of each type of instrument below)
27 A 17 A
PC 9 A 4.5 A
Display (LCD) 1.2 A 1.2 A
N5500A test set (Opt. 001) 3 A 2 A