manualshive.com logo in svg

Agilent Technologies E2094S, User Manual, Page: 122 / 146

Share
Download
Agilent Technologies E2094S User Manual Download Page 122

122

Agilent VISA User’s Guide

5

Programming via LAN

Some examples of TCPIP resource strings follow.

Table 28

Example TCPIP Resource Strings

String

Description

TCPIP0::[email protected]::gpib0,2::INST
R

A VXI-11.2 GPIB device at hostname 

[email protected]

.

TCPIP0::123.456.0.21::gpib0,2::INSTR

A VXI-11.2 GPIB device at a machine whose IP address is 
123.456.0.21.

TCPIP0::myMachine::inst0::INSTR

A VXI-11.3 LAN instrument at hostname 

myMachine

.

TCPIP::myMachine

A VXI-11.3 LAN instrument at hostname 

myMachine

. Note that 

default values for 

board

 

= 0

, 

LAN device name

 

= inst0

, and the 

::INSTR

 resource class are used.

TCPIP0::testMachine1::COM1,488::INSTR

An RS-232 device connected to a LAN server or gateway at 
hostname 

testMachine1

. This device must use SICL-LAN 

protocol since RS-232 devices are not supported by the VXI-11 
protocol.

TCPIP0::myMachine::gpib0,2::INSTR

A GPIB device at hostname 

myMachine

. This device must use 

SICL-LAN protocol since 

gpib0,2

 is not a valid remote name 

with the VXI-11 protocol.

TCPIP0::myMachine::UsbDevice1::INSTR

A USB device with a SICL alias of 

UsbDevice1

 connected to a 

LAN server at hostname 

myMachine

. Note that the SICL alias is 

defined on the remote machine, not on the local machine.

 

Although the SICL and VISA alias names are normally the same, 

if they are not, you must be sure to use the SICL alias and not the 
VISA alias.

This device must use the SICL-LAN protocol since USB devices 
are not supported by the VXI-11 protocol.

Summary of Contents for E2094S



















































































































































Reviews:

No comments