Agilent Technologies DSO9024H, User Manual, Page: 66 / 102

Using the Oscilloscope
66
To start and stop waveform acquisition
• To start waveform acquisition, click the start button at the bottom of the
waveform display area.
• To stop waveform acquisition, click the stop button at the bottom of the
waveform display area.
See figure 3-11.
You can still use the [Run/Stop] key on the front panel. However, if you are
performing many graphical interface operations, it is easier to start and stop
the oscilloscope using the buttons in the interface, so you do not have to
remove your hand from the mouse or the stylus away from the touch screen.
Figure 3-11
Start and Stop Icons
Click this button
to stop waveform Click this button
to start waveform