Agilent Technologies DSO6014A/L, Programmer'S Reference Manual

Page: 335 / 634

Commands by Subsystem
3
Agilent 6000 Series Oscilloscopes Programmer's Reference 335
General :TRIGger Commands
Table 62 General :TRIGger Commands Summary
Command Query Options and Query Returns
:TRIGger:HFReject {{0 |
OFF} | {1 | ON}} (see
page 336 )
:TRIGger:HFReject? (see
page 336 )
{0 | 1}
:TRIGger:HOLDoff
<holdoff_time> (see
page 337 )
:TRIGger:HOLDoff? (see
page 337 )
<holdoff_time> ::= 60 ns to 10 s in
NR3 format
:TRIGger:MODE <mode>
(see page 338 )
:TRIGger:MODE? (see
page 338 )
<mode> ::= {EDGE | GLITch | PATTern
| CAN | DURation | IIC | EBURst | LIN
| SEQuence | SPI | TV | USB |
FLEXray}
<return_value> ::= {<mode> | <none>}
<none> ::= query returns "NONE" if
the :TIMebase:MODE is ROLL or XY
:TRIGger:NREJect {{0 |
OFF} | {1 | ON}} (see
page 339 )
:TRIGger:NREJect? (see
page 339 )
{0 | 1}
:TRIGger:PATTern
<value>, <mask> [,<edge
source>,<edge>] (see
page 340 )
:TRIGger:PATTern? (see
page 341 )
<value> ::= 32-bit integer or
<string>
<mask> ::= 32-bit integer or
<string>
<string> ::= "0xnnnnnn"; n ::=
{0,..,9 | A,..,F}
<edge source> ::= {CHANnel<n> |
EXTernal | NONE} for DSO models
<edge source> ::= {CHANnel<n> |
DIGital0,..,DIGital15 | NONE} for
MSO models
<edge> ::= {POSitive | NEGative}
<n> ::= 1-2 or 1-4 in NR1 format
:TRIGger:SWEep <sweep>
(see page 342 )
:TRIGger:SWEep? (see
page 342 )
<sweep> ::= {AUTO | NORMal}