Agilent Technologies DSO6014A/L, Programmer'S Reference Manual

Page: 232 / 634

232 Agilent 6000 Series Oscilloscopes Programmer's Reference
3
Commands by Subsystem
:MARKer Commands
Set and query the settings of X- axis markers (X1 and X2 cursors) and the
Y- axis markers (Y1 and Y2 cursors). See
"Introduction to :MARKer
Commands" on page 233.
Table 56 :MARKer Commands Summary
Command Query Options and Query Returns
:MARKer:MODE <mode>
(see page 234 )
:MARKer:MODE? (see
page 234 )
<mode> ::= {OFF | MEASurement |
MANual}
:MARKer:X1Position
<position>[suffix] (see
page 235 )
:MARKer:X1Position?
(see page 235 )
<position> ::= X1 cursor position
value in NR3 format
[suffix] ::= {s | ms | us | ns | ps |
Hz | kHz | MHz}
<return_value> ::= X1 cursor
position value in NR3 format
:MARKer:X1Y1source
<source> (see page 236 )
:MARKer:X1Y1source?
(see page 236 )
<source> ::= {CHANnel<n> | FUNCtion
| MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= <source>
:MARKer:X2Position
<position>[suffix] (see
page 237 )
:MARKer:X2Position?
(see page 237 )
<position> ::= X2 cursor position
value in NR3 format
[suffix] ::= {s | ms | us | ns | ps |
Hz | kHz | MHz}
<return_value> ::= X2 cursor
position value in NR3 format
:MARKer:X2Y2source
<source> (see page 238 )
:MARKer:X2Y2source?
(see page 238 )
<source> ::= {CHANnel<n> | FUNCtion
| MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= <source>
n/a :MARKer:XDELta? (see
page 239 )
<return_value> ::= X cursors delta
value in NR3 format
:MARKer:Y1Position
<position>[suffix] (see
page 240 )
:MARKer:Y1Position?
(see page 240 )
<position> ::= Y1 cursor position
value in NR3 format
[suffix] ::= {V | mV | dB}
<return_value> ::= Y1 cursor
position value in NR3 format