Agilent Technologies AuroraPresto, User Manual

Page: 81 / 266

Setting up
Aurora Presto
Issue 7 - 05/02 3-33
Setting the Screen Backlight Power-Off Time Delay
When
Aurora Presto
is operating from batteries, the
backlight on its LCD screen switches off to save power if
the ASDL layer is not active and no keys have been pressed
after a certain length of time. You can change the time delay
before the backlight switches off, although you cannot
disable the feature entirely.
-1-
Select
LCD Backlight
from the
System Setup
menu
to display the following:
-2-
Highlight your choice and press ENTER to close the
option window.
-3-
Press ESC to save your selection and close the
System Setup
menu.
Changing the Date/Time on the Internal Clock
Aurora Presto
has an internal clock/calendar
(Real-Time Clock) which is used to time-stamp decodes and
test results.
To change the time
-1-
From the
System Setup
menu, select
Time
to display
a time entry window:
-2-
Enter a time in hours, minutes and seconds, using the
24-hour clock. To enter each digit, move the cursor to
the required position and type the digit. The new digit
replaces the one already in that position.
-3-
Press ENTER to save the new time and exit.
481801-7.book Page 33 Thursday, May 23, 2002 10:46 AM