Agilent Technologies AuroraPresto, User Manual

Page: 128 / 266

Aurora Presto
—User Guide
4-28 481801
Running a TDR Test
You can use the TDR Test to locate and investigate faults on
the line or faults indicated by the DMM test.
See DMM
Tests on page 4-21.
-1-
From the
Physical Test
screen select
TDR Tests
and
press ENTER to display the following screen:
-2-
To start the test, press F1
Start
from the
TDR Tests
screen
OR
press ESC from the
TDR Setup
screen.
A screen similar to the following is displayed.
If you want to stop the test press F1
Stop
to return to
the previous screen.
The results of the test are displayed as a graph.
You can move through the display using the keypad. See
TDR Key Sequence table on page 4-30.
481801-7.book Page 28 Thursday, May 23, 2002 10:46 AM