Agilent Technologies AuroraPresto, User Manual

Page: 119 / 266

Section 3 - Physical Layer Tests
Issue 7 - 05/02 4-19
Running the Noise Analysis Test
Note
The ADSL Layer must be down before you start the Noise
Analysis Test. Synchronise the DSL, see page
4-34 .
-1-
From the
Select Test Mode
screen select
Manual
Tests
to display the
Select Operation
screen.
-2-
Select
Physical Layer
to display the following screen.
-3-
Select
Noise Analysis
to display the following
screen.
-4-
Press F1
Start
. The following screen is displayed.
When the Noise Analysis test has finished a screen
similar to the following is displayed.
Press ESC to display the previous screen.
From the previous screen, press F2
View
to display
the graph screen again.
481801-7.book Page 19 Thursday, May 23, 2002 10:46 AM