2
Installation and Use
Tools required for Micro Gasifier installation
18
Agilent 990 Micro GC Micro Gasifier User Manual
8
Connect the new sample inlet manifold to the gasifier by a 1/16 in nut and ferrule using a
5/16 in wrench.
9
Use a 3/16 in wrench to screw the sample line nuts to the inlet manifold. Install the inlet
manifold onto the channel by tightening the two Torx T-10 screws. Use a 3/16 in wrench to
screw the sample line nuts to the front of the channel.
Summary of Contents for 990
Page 1: ...Agilent 990 Micro Gas Chromatograph Micro Gasifier User Manual ...
Page 4: ...4 Agilent 990 Micro GC Micro Gasifier User Manual ...
Page 10: ...1 Introduction Disposal Instructions 10 Agilent 990 Micro GC Micro Gasifier User Manual ...
Page 23: ...Agilent 990 Micro GC Micro Gasifier User Manual 23 ...
