683
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_gen_op_overview_man_measurements.fm
cdma2000 Measurement Procedures
Measuring Gated Power
These measurements can be made only when one of the following radio configurations (see
) is selected:
• (Fwd1, Rvs1)
• (Fwd2, Rvs2)
1. Select the Gated Power measurement (see
“B. Select measurements.” on page 656
).
2. Press the (
F4
) key to select
Zoom
.
3. Turn the knob clockwise slowly to display the entire burst. Note the falling edge of the burst at the last
zoom position on the right side of the display.
4. Press the (
F2
) key to select the
Rise/Fall View.