Agilent Technologies 87511A, Operation And Service Manual

Page: 38 / 48

8. The eective source match is display ed on the computer. Record the P erformance T est
Program.
9. Press 4 LOCAL 5.
10.
Press 4 CAL 5,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
CALIBRATE MENU ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
S22 1-PORT to en ter 1-p ort calibration men u, and then
p erform the 1-p ort calibration as follo ws.
1-POR T Calibration
a. Connect an OPEN to the TEST POR T 2 of the 87511A/B, and press the following
softkeys.
87511A: Press
NNNNNNNNNNNNN
OPEN .
87511A Opt. 001: Press
NNNNNNNNNNNNNNNN
OPENS ,
NNNNNNNNNNNNNNNNNNNNN
OPEN[F] ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DONE: OPENS .
87511B: Press
NNNNNNNNNNNNNNNN
OPENS ,
NNNNNNNNNNNNNNNNNNNNN
OPEN[F] ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DONE: OPENS .
b. Remo v e the OPEN from the TEST POR T 2, and connect the SHOR T to the TEST
POR T 2, and press the follo wing softkeys.
87511A: Press
NNNNNNNNNNNNNNNN
SHORT .
87511A Opt. 001: Press
NNNNNNNNNNNNNNNNNN
SHORTS ,
NNNNNNNNNNNNNNNNNNNNNNNN
SHORT[F] ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DONE: SHORTS .
87511B: Press
NNNNNNNNNNNNNNNNNN
SHORTS ,
NNNNNNNNNNNNNNNNNNNNNNNN
SHORT[F] ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DONE: SHORTS .
c. Remo v e the SHOR T from the TEST POR T 1, and connect the following T ermination
to the TEST POR T 1, and press
NNNNNNNNNNNNNN
LOAD .
87511A: 7mm - 50 T ermination supplied with the 85031B
87511A Opt.001: T yp e-N 50 T ermination (909F opt.012)
87511B: T yp e-N 75 T ermination supplied with the 85036B
d. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
DONE 1-PORT CAL to conclude the calibration routine. The display should sho w
\Cor" in the status indicator area.
11. R UN the program.
12. The eective source match is display ed on the computer. Record the P erformance T est
Program.
4-12 P erformance T ests