Agilent Technologies 85050B, User'S And Service Manual

Page: 8 / 56

1- 2 85050B
General Information
Calibration Kit Overview
Calibration Kit Overview
The Agilent 85050B 7 mm calibration kit is used to calibrate Agilent network analyzers up
to 18 GHz for measurements of components with 7 mm connectors.
The standards in this calibration kit allow you to perform simple 1- or 2-port and TRM
(thru–reflect–match) calibrations.
This manual describes the 85050B calibration kit and provides replacement part numbers,
specifications, and procedures for using, maintaining, and troubleshooting the kit.
Kit Contents
The 85050B calibration kit includes the following items:
• user’s and service guide
• open, short, broadband load, lowband load, and a sliding load termination
• 7 mm gage set
• 3/4 in, 135 N-cm (12 in-lb) torque wrench for use on the 7-mm connectors
• data disk that contains the calibration definitions of the devices in the kit for the 8510
systems
• a data disk set that contains the specifications and performance verification data for the
8510 systems
Refer to Table 6-1 on page 6-2 for a complete list of kit contents and their associated part
numbers.
NOTE A backup copy of each data disk and printout should be made immediately
upon receipt of the calibration kit. For information on making a disc backup
copy using a VNA, ENA or PNA series network analyzer, refer to the
appropriate user guide or online Help.
• To view the ENA or PNA online Help, press the Help key on the front panel
of the network analyzer.
• To view an online VNA user guide, use the following steps:
1. Go to www.agilent.com .
2. Enter your VNA model number (Ex: 8753ES) in the Search box and c
click
Search .
3. Under the heading Manuals & Guides , click on the title/hyperlink for
the document PDF you want to view.
Opens and Shorts
The opens and shorts are built from parts that are machined to the current state-of-the-art
in precision machining.