Agilent Technologies 83236B, Operating Manual, Page: 79 / 164

79
Chapter 3, Programming the PCS Interface using GPIB Control
Set Up and Measure
Set Up and Measure
Figure 26 shows the tasks necessary to set up and measure with the Test System.
Figure 26
Set Up and Measure
Start
Initialize the
Set Up and
More?
End
System
Measure
Y
N
Initialize
Set Up the UUT
Ports
Set the Test Frequencies
and Levels (for RX or TX testing)
Test Procedure Flow
Activate the
UUT
Set the TX Attenuator
Level (for TX testing)
Set up the Power Detector
(for TX power measurements)
Make the Measurement
Perform the Temperature
Compensations