Agilent Technologies 83236B, Operating Manual, Page: 46 / 164

46
Chapter 2, Installation
When Used with Agilent 8920A,B and Controlled via GPIB for TDMA Subscriber Unit Tests
2 Placing the equipment:
a If you are placing the Test System horizontally (on a bench top, for example) place
the Test Set (together with the Cellular Adapter) on the top of the PCS Interface.
Position the bumpers (feet) of the Test Set so that they are stably seated between
the forward and rear bumpers of the PCS Interface. Refer to figure 10.
Figure 10 Horizontal stacking configuration (side view) for the Agilent 8920 or Agilent 8921
Test Configuration
Test Set Cellular Adapter
PCS Interface