Agilent Technologies 5517B, User Manual

Page: 20 / 102

6 Agilent 5517B/BL/C/D/DL/FL User’s Guide
1
General Information
Options
Table 3 lists most available options.
* Support Option W50 is available only at the time of purchase. Service contracts are available from Agilent for
instruments which did not include support options at the time of purchase. For information, contact your
nearest Agilent Technologies Sales and Support office (offices are listed at the back of this manual).
Table 3 Available options
*
* Contact your Agilent representative for information about additional options.
Model Option* Description
5517B Option A6J ANSI-NCSL 2540-1-1994 Compliant Calibration
Option 141 Japanese User’s Manual
5517BL Option AV4 Laser and Optics User’s Manual
Option A6J ANSI-NCSL 2540-1-1994 Compliant Calibration
5517C Option A6J ANSI-NCSL 2540-1-1994 Compliant Calibration
Option H07 Optical Power > 400 µW
Option OBV Additional User’s Manual
Option 003 3mm beam
Option 006 6mm beam (default)
Option 009 9mm beam
Option 030 Replaces standard feet with three electrically insulated feet.
Option 038 Delete feet
Option 039 Standard Mounting (default)
5517D Option A6J ANSI-NCSL 2540-1-1994 Compliant Calibration
Option 030 Replaces standard feet with three electrically insulated feet.
Option 039 Standard Mounting (default)
5517DL Option 006 6mm beam (default)
Option 009 9mm beam
Option 038 Delete feet
Option 039 Standard Mounting (default)
5517FL Option 006 6mm beam (default)
Option 009 9mm beam
Option 030 Replaces standard feet with three electrically insulated feet.
Option 039 Standard feet (default)