![Agilent Technologies 54810A User'S Quick Start Manual Download Page 80](http://html.mh-extra.com/html/agilent-technologies/54810a/54810a_users-quick-start-manual_2868590080.webp)
Using the Oscilloscope
To turn a channel on or off
3-40
To turn a channel on or off
• To turn a channel on, click the check box next to the channel number
so that a check mark appears in the box. To turn a channel off, click
the check box again to clear it.
If you are not using a channel, you can turn it off. This simplifies the waveform
display and also increases the display update rate. When you turn off a channel,
the current vertical scaling factor and vertical scale buttons for that channel
disappear. They re-appear when you turn the channel on.
You can also turn a channel on or off by using the Channel Setup dialog box, or
by using the front panel key for that channel.
Figure 3-28
Turning a Channel On or Off
Turn a channel off
by clicking in the
On check box until
the box is cleared
Turn a channel on by
clicking in the On
check box until a
check mark appears
Summary of Contents for 54810A
Page 5: ...1 Setting Up the Oscilloscope ...
Page 37: ...2 Working in Comfort ...
Page 41: ...3 Using the Oscilloscope ...