Software Installation and Configuration
3
Agilent 34945A Microwave Switch/Attenuator Driver Module User’s Guide
45
work servers that support Dynamic Domain Name Service (DNS). For network
servers that do not support Dynamic DNS, only the IP address is reported.
Instrument Addressing
During programming, the 34980A/34945A is accessed
through its address string which consists of an IP address:
TCPIP0::169.254.86.15::inst0::INSTR
or host name:
TCPIP0::A-34980A-12345.agilent.com::inst0::INSTR
LAN Default Configuration
If necessary, the 34980A LAN interface can be reset to its default
configuration settings from the front panel. These settings are listed in Table
3-3.
Table 3-3. Default LAN Configuration Settings.
LAN Parameter
Default (Reset) Setting
DHCP
ON
Automatic IP Addressing
ON
IP Settings if DHCP Server
Unavailable
IP Address: 169.254.9.80 (default)
Subnet Mask: 255.255.0.0
Default Gateway: 0.0.0.0
DNS Server
0.0.0.0 (may be assigned by the DHCP server)
Host Name (registered with
DDNS if available)
A-34980A-last 5 digits of serial number
Net BIOS
ON
LAN Keep Alive
1800 (seconds)
Ethernet Connection Monitoring
ON - instrument monitors its LAN connection;
will attempt to automatically reconnect if dis-
connected from network.
Password
None (disabled)
