©
Agilent Technologies 1989–2002
Agilent 3070 / 79000 Site Preparation
10-60
Chapter 10: Site Preparation – Power Requirements for Older Systems: Series 3 Power Requirements and Connections (Prior to May 2001)
307X 4-Module 2-PDU System AC Outlets
Beginning with the release of Series 3, with 4-module
2-PDU systems, the DUT power supplies are connected
directly to the E1135C PDU, and there are no outlet
boxes in the Support Bay, as shown in
Since each of these options are single-phase, which
outlet a DUT power supply connects to does not affect
the load balance, but knowing where each power supply
is plugged in helps when servicing the system.
Figure 10-45
307X 4-module 2-PDU system
Outlet 0
Support Bay
(Rear View)
Testhead (Rear View)
PDU
Branch
Main
Outlet 2
Outlet 3
Outlet 1
5
6
7
8
To Gnd
1
2
3
4
To Gnd
See Table
See Table
See Table
See Table
