Agilent Technologies 11713B, Operating And Service Manual, Page: 38 / 114

38 11713B/C Operating and Service Manual
3
Specifications
General Specifications
Drive Power Supply Specifications
Specifications below describe warranted performance over the
temperature range 0 to +50
°
C after one hour of continuous
operation, unless otherwise noted.
Supplement Characteristics
Supplement characteristics are intended to provide useful
information and are typical but non- warranted performance
parameters.
Table 7 11713B/C Drive Power Supply Specifications
Voltage +24 ± 8% Vdc
+5 ± 5% Vdc
*
+15 ± 12% Vdc
*
* For 11713C only
Current 1.7 A maximum continuous current
Contact pairs 1 through 8, 9, and 0, maximum current of 1.7 A
continuous through all contacts (< 0.7 A per contact)
Table 8 11713B/C Supplemental Characteristics
Power 100 to 240 Vac, automatic selection, 50/60 Hz
100 VA maximum
Mains supply voltage fluctuations are not to exceed 10 percent
of the nominal supply voltage
Response Time 100
μ
s maximum for contact pairs 1 through 8
20 ms maximum for contact pairs 9 and 0
Driver Life > 2,000,000 switchings at 0.7 A for contact pairs 9 and 0
Maximum Load
Inductance 500 mH
Maximum Load
Capacitance < 0.01
μ
F for contact pairs 9 and 0