Remove the (2) brackets on the rear facing edge of the front panel. Attach (1) included solar panel
bracket to the panel using existing t-nuts with screws & washers from the hardware kit. Center the
bracket on the panel before tightening everything. Install the square cross bar. Install the hardware into
the ends of the square crossbar to make it easier to reinstall the solar panel later. Set this panel aside.
3
If your Revel is equipped with a smaller 100-watt front panel install the square crossbar so that the
panel is offset towards the passenger side when installed on the vehicle. This it to keep the satellite
antenna uncovered for optimal reception.
