background image

52

8210-00001 R0

10. Limited Warranty

This warranty relates to Belt Conveyors (the “Product”) sold by AGI (referred to herein as the
“Seller”) and applies only to the first user of the Product (meaning a purchaser directly from the
Seller or from an authorized dealer or distributor of the Product, referred to herein as the “Buyer”).

This warranty shall only be effective if properly registered with the Seller in accordance with
information provided to the Buyer at the time of sale.

1. The Seller warrants to the Buyer that the Product is free from defects in material and workmanship

under normal and reasonable use

and in accordance with manufacturer’s manual.

2. This warranty applies only to defects in materials and workmanship and not to damage incurred in

shipping or handling, through normal wear and tear, or damage due to causes beyond the control
of the Seller such as lightning, fire, flood, wind, earthquake, excessive voltage, mechanical shock,
water damage, or damage arising out of abuse, alteration, improper assembly, improper
installation, improper maintenance or improper repair of the Product.

3.

The warranty period for the Product shall be two years from delivery of the Product to the Buyer
where the Product is used in a normal farm operation. First year of warranty coverage of parts
and repair labour, second year warranty coverage of parts only. Warranty period for the Product
shall be 90 days from delivery of the Product to the Buyer where the Product is used in a
commercial operation. No warranty is given where the Product was used to convey canola.

In

the event that any part incorporated into the Product is manufactured and sold to the Seller by a
third party vendor, such part is only warranted to the extent of the warranty given by that third
party.

4. This warranty does not obligate the Seller to bear costs of travel in replacing defective parts.

5. The obligations set forth in this warranty are conditional upon the Buyer promptly notifying the

Seller of any defect and completing reasonably required documentation and, if required, promptly
making the Product available for correction.

6. The total liability of the Seller on any claim, whether in contract, tort or otherwise, arising out of,

connected with, or resulting from the manufacture, sale, delivery, repair, replacement or use of the
Product or any part thereof

shall not exceed the price paid for the Product

and the Seller shall not

be liable for any special indirect, incidental or consequential damages caused by reason of the
installation, modification, use, repair, maintenance or mechanical failure of the Product.

Consequential or special damages as used herein include, but are not limited to, lost or damaged
products or goods, costs of transportation, lost sales, lost orders, lost income, increased
overhead, labor and incidental costs and operational inefficiencies

.

7. The foregoing warranty is the entire warranty of the Seller to the Buyer and the Buyer shall not be

entitled to rely upon any representation or warranty contained in any marketing material of the
Seller in respect of the Product. The Seller neither assumes, nor authorizes any other person
purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other
warranty or liability concerning the Product.

WARRANTY VOID IF NOT REGISTERED

10. LIMITED WARRANTY

PTO TOP-DRIVE FIELD LOADER – PORTABLE GRAIN BELT CONVEYOR

Summary of Contents for Batco BCX2























































Reviews: