P1512181 R0
45
Figure 19.
Using the Ratchet Strap
1
3
4
2
9. Install the lacing pin and crimp the retainer clips onto each end of the lacing pin, see
.
10. Remove the ratchet strap and tighten the conveyor belt (see “Tension the Conveyor Belt”).
11. Check and set the belt alignment (see “Align the Conveyor Belt”).
12. Engage the conveyor drive. Allow it to run for 30 seconds, then shut down the conveyor and inspect the
lacing.
Figure 20.
Lacing the Conveyor Belt
7.15. Clean and Wash the Equipment
1. Clean out excess grain from all areas of the conveyor.
BCX2 FIELD LOADER – PORTABLE GRAIN BELT CONVEYOR
