AGI A296 Installation Instructions Download

Page: 3 / 4

30940 R5

Figure 3.

Installing the Winch Cable (same routing for 100 and 130 series augers)

WINCH CABLE

SPOOL

NOTE: FEED THE CABLE MINIMUM 3 WRAPS

AROUND THE SPOOL

THREAD CABLE

THROUGH HOLE

CABLE CLAMP

PULLEY

PULLEY GUIDE

PULLEY

6. Attach the double hose holder to the PTO bracket with a 3/8” x 1” bolt and locknut (see

Figure 4.

Attaching Double Hose Holder

3/8” x 1” BOLT

DOUBLE HOSE

HOLDER

PTO BRACKET

3/8” LOCKNUT

[29246]

[17402]

7. Connect hydraulic hose between the tractor and winch (see

A296/A266 HYDRAULIC WINCH KIT –

Summary of Contents for A296

Page 1: ...ving the cable clamp and pulling the cable free of the spool 2 Disconnect the manual winch from the auger boot 3 Install the hydraulic winch see Figure 1 on page 2 or Figure 2 on page 2 4 For 100 seri...

Page 2: ...2 3 8 FLAT WASHERS 17392 POSITION FOR HYDRAULIC WINCH FLAT WASHERS 17392 3 8 X 1 BOLTS 18955 AND LOCKNUTS 17402 LIFT ARM PULLEY GUIDE Figure 2 Installing the Hydraulic Winch MKX130 X130 HX130 WINCH MO...

Page 3: ...THROUGH HOLE CABLE CLAMP PULLEY PULLEY GUIDE PULLEY 6 Attach the double hose holder to the PTO bracket with a 3 8 x 1 bolt and locknut see Figure 4 on page 3 Figure 4 Attaching Double Hose Holder 3 8...

Page 4: ...art Hutchinson Mayrath P O Box 39 Rosenort Manitoba R0G 1W0 Canada 514 W Crawford St Clay Center Kansas 67432 USA Phone 866 467 7207 Canada USA or 204 746 2396 Fax 866 768 4852 Phone 800 523 6993 or 7...