AGI 1535, Operator'S Manual, Page: 37 / 68

8210–00009 R1 37
Figure 11. Wheel Over-Center Handle Positions
Engaged Disengaged
2. Set and run the gas engine at approximately half throttle.
3. Refer to the controls shown in Figure 12 on page 37 or Figure 13 .
4. Before moving the conveyor into position:
• Fully lower the conveyor.
• Raise the intake end slightly off the ground to position the conveyor.
• Raise the conveyor discharge end only for final positioning such as when next to a storage bin or grain
truck.
Figure 12. Wheel Move Kit Controls (1500 and 2000 Series)
S-DRIVE FIELD LOADER – PORTABLE GRAIN BELT CONVEYOR 5. PLACEMENT