background image

HS-Module 30

11

Copyright

Copyright  2004 AGFEO GmbH & Co. KG

      Gaswerkstr. 8

                      D-33647 Bielefeld (Germany)
All rights to this documentation are reserved by AGFEO GmbH & Co. KG. This applies in particular
to the issue of patents or the entry of registered designs.
Neither the complete documentation nor any parts of it are allowed to be changed or translated
into any language or any form of computer language by any means without our express written
permission. This applies to electronic, mechanical, optical and chemical media or any other type of
medium. The brand names and company names used in this documentation are subject to the
rights of the respective companies concerned.

AGFEO GmbH & Co. KG reserves the right to make changes to the representations and data
contained in this documentation resulting from technical developments without prior notice. This
documentation has been written with great care and is subject to regular update. Despite the
degree of effort taken, we can accept no liability for technical impreciseness and typographical
errors which we may have overseen. All errors which come to our attention will be corrected in
future editions. We would be grateful if you could inform us of any errors found in this
documentation.

Technical Changes

Summary of Contents for HS-Module 30













Reviews: