AgfaPhoto DC8200, User Manual

Page: 6 / 67

Please refer to the below diagram for correct installa � on:
1. Slide the ba � ery cover below the camera to open the ba � ery compartment and access the memory card slot.
2. Insert the memory card by gently sliding it in the correct polarity direc � on and un �l it clicks (t he card top should be fl ushed
with the ba � ery one).
3. An SD icon shows up then on the LCD screen when you turn the camera on indica � ng you that the card has been well
installed and all fil es will be stored on it.
4. Then close the ba � ery cover and slide it to lock it in place.
5. Make sure that the card is not locked, otherwise photos and videos you took will not be saved.
Note:
- The internal memory can only store a few photos for test purposes. It is recommended to download them on a computer
if you want to keep it, otherwise they could be lost when the camera automa � cally shuts down because its charge is low or
when you remove away the ba � ery.
- If there is a photo stored in the internal memory when you insert a card into your camera, a “Copy to card” message will
show up on the LCD screen with “Yes” or “No” op � ons. By selec � ng “Yes”, the photo will be then copied to the card.
-
Forma � ng will delete all data stored on the memory card including those which are protected.
-
Do not remove the SD card during forma � ng as this may damage the card and render it unusable.
- When memory is full, download the fil es from the SD card to your PC or directly delete some photos and videos to free up
storage space.